Golf L4-1781cc 1.8L SOHC (ACC) Can (1993)
Fig. 28 Exploded View Of Rear Windshield Wiper Assembly
Refer to Fig. 19 throuth 24 when replacing front linkages. Refer to Fig. 26 when replacing rear linkages.
1. Remove cap or cover at base of wiper arms, then remove wiper arm retaining nuts from pivot shafts.
2. Remove wiper arm and blade assemblies. Note Park position of wiper arms for later assembly.
3. On models with front linkages, open hood and remove any panels necessary to gain access to cowl area where wiper motor and linkage are
mounted.
4. On models with rear linkages, remove trim panels necessary to access rear wiper assembly.
5. Disconnect wiper motor electrical connector.
6. Remove nuts retaining wiper pivot shaft bushing to panel. Note position of any washers, spacers and seals for later assembly.