Golf L4-1781cc 1.8L SOHC (RV) (1990)
Condition
The front wheel house molding may be torn loose from the fender if the spoiler or molding contacts a curb or parking block.
Service solution
To reinforce the replacement fender flare an additional fastener is needed to attach the front lower edge of the wheel house molding to the inner fender
liner.
Speed Nut,
Part No. N 015 448 1
Screw,
Part No. 175 853 999B
See illustration.
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest information.