Golf L4-1781cc 1.8L SOHC (RV) (1990)
Vacuum Brake Booster: Service and Repair
CHECK
1.
Depress brake pedal firmly approximately 20 times with engine Off.
2.
Depress brake pedal and hold.
3.
Start engine, if brake booster is working properly, pedal will fall slightly and then hold.
REMOVAL/INSTALLATION
1.
Remove master cylinder as previously described.
2.
Disconnect vacuum line(s) from booster.
3.
Remove brake booster attaching bolts.
4.
Disconnect booster pushrod from brake pedal.
5.
Reverse procedure to install.