Golf L4-1781cc 1.8L SOHC (RV) (1990)
Blower Motor: Service and Repair
Blower Motor Removal and Installation
-
Remove the lower-right instrument panel tray by removing the screws.
-
With full-length trays it is necessary to remove two screws securing the fuse panel to the tray.
NOTE: On models with passive restraint there may be a knee bar.
-
Remove bolts at either end of knee bar, and remove knee bar.
-
Pry out the glove box light assembly and remove its wiring connector.
-
Remove the glove box by removing the screws around its rim.
-
Remove the blower motor by depressing the retaining lug and twisting the assembly off as shown.
-
Disconnect the electrical connector.
NOTE: Installation is in reverse order of removal.