Golf L4-1781cc 1.8L SOHC (RV) (1990)
-
Remove instrument panel retaining screws (B) and (C), and retaining nuts (A). Access nuts from the engine compartment. Nuts are located in the
plenum.
-
Partially pull the instrument panel away from the body.
-
Remove any other electrical connections to the panel, and then pull it from the vehicle.
NOTE: Installation is the reverse of removal observing the following:
^
Make sure that the sealing washers on the instrument panel studs are in place as shown before the panel is installed.
^
Check all electrical connections.