volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 6338 > < Diagram Information and Instructions|Page 6336
Page 1
background image

Oil Pressure Warning Lamp/Indicator: Testing and Inspection

Dynamic Oil Pressure Warning System, Troubleshooting 

Note:  Always refer to appropriate wiring diagram.

Test conditions 

^

engine oil level OK 

^

tachometer, oil pressure switches OK 

Tools required 

^  Multimeter Fluke 83 (US 1119)

^  test box V.A.G 1598 with adaptor 1598/8 

System operation 

Ignition ON, engine OFF 

^  warning LED in instrument cluster flashes IF oil pressure switch 0.3 bar (4.4 psi) (F22) OK 

Ignition ON, engine at idle 

^  warning LED in instrument cluster flashes when oil pressure drops below 0.3 bar (4.4 psi) (F22) 

Ignition ON, engine speed over 2050 RPM 

^  LED flashes at oil pressure below 1.8 bar (25.0 psi) (F1) 
^  audio warning sounds after approximately 3.0 second delay
^  audio/visual warning continues until oil pressure increases to 1.8.bar (25.0 psi) (F1) or ignition is turned off
^  RPM tolerance ± 100

Diagram Information and Instructions|Page 6338 > < Diagram Information and Instructions|Page 6336