Golf L4-1781cc 1.8L SOHC (RV) (1990)
Shifter A/T: Technical Service Bulletins
A/T Shift Handle - Replacement Part/Installation
Subject:
New Shift Handle, Installation Procedure
Model(s): Golf, Jetta 1990, 1991 m.y.
Group:
37
Number:
91-01
Date:
Jan. 31, 1991
A new shift handle, for automatic transmission (010 type shift selector) is available for use as a replacement part.
Installation Procedure
^
Remove old handle, Part No. 447 713 139A 01C
^
Install handle (1), Part No. 357 713 139 01C on selector lever.
^
Tighten set screw to make indentation on shift selector (2) and loosen set screw.
^
Remove handle and file a flat region in selector lever (2) at location established in previous step.
^
Install handle (1) and tighten set screw to 0.8 +/- 0.2 Nm ( 0.6 in.lb.).
CAUTION Part numbers are for reference only. Always check with your Parts Department for latest information.