volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Intake Air Temperature Sensor|Testing and Inspection
Page 2
background image

Scale B the values for temperature range 50 to 100°C

Examples:
30°C corresponds to a resistance from 1500 to 2000 Ohms
80°C corresponds to a resistance from 275 to 375 Ohms

If specification not obtained:
-

Replace Intake Air Temperature sensor G72

-

Display the readiness code

If DTC memory was erased:
-

Create readiness code again

If specification obtained:

-

Connect Test Box VAG 1598/18 to ECM harness connector

-

Check wiring for open circuit between Test Box and the connector using wiring diagram:
terminal 1 + socket 64
terminal 2 + socket 33
Wire resistance: 1.5 Ohms maximum

Also check wires for shorting to one another
Specification: Infinite Ohms

If wiring OK:
-

Replace Diesel direct injection system ECM J248

-

Display the readiness code

If DTC memory was erased:
-

Create readiness code again

Manifold Pressure/Vacuum Sensor > < Intake Air Temperature Sensor|Testing and Inspection