Golf L4-2.0L (AEG) (1999)
-
Turn wheel hub and measure distance between rotor and speed sensor, -dimension a-, all around.
^
Dimension a = 0.3 mm (0.0118 inch)
-
If the rotor is not true, remove wheel hub with rotor and replace. Refer to Transmission and Drivetrain; Drive Axles, Bearings and Joints.
Sensor
ABS System Components For Front Axle, Removing And Installing
Note:
^
Removing and installing ABS system components is identical for FS 1/1 and FN 3 brake calipers.
1. ABS wheel speed sensor
^
Before inserting sensor, clean mounting hole inner surface and coat with lubricant, G 000 650
2. Wheel bearing housing
3. Hex socket head bolt, 8 Nm (70 inch lbs.)
4. Splash shield
5. Hex bolt, 7 Nm (62 inch lbs.)
6. Wheel bearing
^
Replace each time after removing refer to Transmission and Drivetrain; Drive Axles, Bearings and Joints.
7. Screw
8. Brake disc
9. Wheel hub with ABS wheel speed sensor rotor