volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Selector Mechanism Removing and Installing|Page 5810 > < Installation Position|Page 5807
Page 1
background image

Shifter M/T: Service and Repair
Selector Mechanism Removing and Installing

5 Speed Manual 02J

Selector mechanism, removing and installing
Removing

Selector mechanism up to 12.00 

-

Pry gate selector cable -A- and gear selector cable -B- off transmission using an open jaw spanner.
1 = 13 mm open jaw spanner, commercially available

Selector mechanism from 01.01 

-

Remove securing clip -3- for gear selector cable from gear selector lever -1-.

-

Remove securing clip -4- for gate selector cable from relay lever -2-.

-

Lever gate selector cable and gear selector cable off pin (arrows).

Continued for all selector mechanism

Selector Mechanism Removing and Installing|Page 5810 > < Installation Position|Page 5807