Golf L4-2.0L (AZG) (2004)
-
Connect diagnostic cable connector to Data Link Connector (DLC).
-
Switch on tester-arrow-.
Note: The tester requires approx. 3 minutes to warm up.
-
Start engine.
-
Select zone "Vehicle self-diagnosis" on touch screen.
-
From this point, tester VAS 5051 guides user further.
If V.A.G 1551 is used:
-
Remove DLC cover -1-.
-
With ignition switched off, connect V.A.G 1551 Scan Tool with diagnosis cable V.A.G 1551/3A.