volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Brakes and Traction Control > < Transmission Temperature Sensor/Switch, A/T|Locations|Page 5408
Page 2
background image

Terminal 1 + socket 67
Terminal 12 + socket 6

Wire resistance: max. 1.5 Ohms

-

Check wires for short circuit to each other, to vehicle Ground (GND) and to B+.

Specified value: Infinite Ohms

If no malfunctions are found in wires.

-

Replace circuit board with integrated Transmission fluid temperature sensor -G93-:

-

Erase DTC memory of Transmission Control Module (TCM), Diagnostic mode 4: Reset/erase diagnostic data. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic
Mode 4: Reset/Erase Diagnostic Data

-

Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes.

Brakes and Traction Control > < Transmission Temperature Sensor/Switch, A/T|Locations|Page 5408