Golf L4-2.0L DSL Turbo (CJAA) (2010)
Wheel Speed Sensor: Service and Repair
Rear Wheel Speed Sensor
Rear Wheel Speed Sensor
Removing
-
Raise the vehicle.
-
Disconnect the speed sensor connector - 1 -.
-
Remove the bolt - 2 -.
-
Remove the wheel speed sensor from the wheel bearing housing.
Installing
-
Before installing the speed sensor, clean the inner surface of the hole and lubricate the speed sensor with hot bolt paste ( G 052 112 A3).
-
Install the speed sensor and tighten the bolt to 8 Nm.
-
Connect the speed sensor connector.