Golf L4-2.0L DSL Turbo (CJAA) (2010)
Suspension Control Module: Service and Repair
Electronic Damping Control Module Bracket
Electronic Damping Control Module Bracket
Removing
-
Remove the electronic damping control module ( J250). Refer to => [ Electronic Damping Control Module ] See: Electronic Damping Control
Module.
-
Remove the bolt - arrow -.
-
Push the 4 tabs on the bracket outward with a screwdriver, one after the other. When doing this, tilt the bracket slightly and then turn it clockwise
and remove it.
Installing
-
Attach the bracket into the top of the side panel and then turn it into the mount.
-
Install the bolt - arrow -.
-
Install the electronic damping control module. Refer to => [ Electronic Damping Control Module ] See: Electronic Damping Control Module.