Golf L4-2.0L DSL Turbo (CJAA) (2010)
/Page-1542002.png)
^
On the first coupling (4) attach one of the connection hoses (1).
^
On that the valve (2) followed by the second connection hose (1).
^
Finally the second coupling (4).
Now the valve is ready for installation.
^
Remove the trim of the rear hatch according to the repair manual.
^
Mark the washer hose directly between the clips (illustration 3).
^
Detach the hose from the clips and cut out the marked section.
^
Put one end of the valve into the hose (illustration 4).
^
Push the shrink-fit hose over the non-return valve (illustration 5).
