Golf L4-2.0L DSL Turbo (CJAA) (2010)
Wiper Arm: Adjustments
Windshield Wiper Blades, Adjusting Park Position
Windshield Wiper Blades, Adjusting Park Position
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
-
Deactivate APP function. Refer to => [ Wiper Motor Alternating Park Position Function, Deactivating ] See: Wiper Motor/Testing and Inspection
if not already done by this time.
-
Let wiper run into rest position and then switch off ignition.
-
Now set the park positions of the windshield wiper blades.
Driver side:
Distance - A - between tips of wiper lips and upper edge of plenum chamber cover must be 10 mm.
-
If necessary, set park position of windshield wiper blades by offsetting wiper arms.
Wiper arms, removing. Refer to => [ Wiper Arms, Removing ] See: Service and Repair/Removal and Replacement/Windshield Washer System.
-
Tighten the threaded connections to the specification given in the assembly overview. Refer to => [ Windshield Washer System, Assembly
Overview ] See: Service and Repair/Removal and Replacement/Windshield Washer System, Assembly Overview.
Passenger side: