Golf L5-2.5L (CBUA) (2010)
6
Bolt
‹› Replace
‹› 60 Nm + 90° (1/4) additional turn.
7
Drive Plate/Flywheel
‹› To remove, lock crankshaft using locking pin (T40069 ).
‹› Flywheel must not be pried out or timing housing cover will be damaged
‹› Drive plate, removing and installing. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.
8
Sensor Wheel
‹› For the engine speed (RPM) sensor (G28).
‹› With position holder.
9
Seal
‹› Removing and installing, refer to => [ Control Housing Cover Seal ] See: Variable Valve Timing Actuator Seal/Service and Repair.
10
Control Housing Cover
‹› Removing and installing, refer to => [ Control Housing Cover ] See: Camshaft, Lifters and Push Rods/Variable Valve Timing Cover /
Housing/Service and Repair.
11
O-ring
‹› Replace
12
Bolt
‹› 25 Nm
13
Fitting Sleeves
14
Bolt
‹› 5 Nm
15
Engine Speed (RPM) Sensor (G28)
16
Seal
‹› Replace