Golf L5-2.5L (CBUA) (2010)
-
Using the steel wire - 2 -, release - arrow - the retaining lever - 3 - of the lock cylinder - 1 -.
-
Remove the lock cylinder - 1 - from the steering lock housing.
-
Disconnect harness connector - arrow - at induction coil.
Installing:
‹› To improve clarity, the ignition key is not shown in the following illustration.
-
Insert the ignition key into the lock cylinder - 1 - and turn it to the Run position.
-
Using the steel wire - 2 -, release - arrow - the retaining lever - 3 - of the lock cylinder - 1 -.
-
Connect the immobilizer induction coil connector.
-
Insert the lock cylinder - 1 - into the steering lock housing.
‹› Connection of induction coil for anti-theft immobilizer must be inserted into guide on steering lock housing.