Golf L5-2.5L (CBUA) (2010)
Shift Cable: Service and Repair
Operating Cables Assembly Overview
‹› Lubricate mounting areas and slide surfaces with grease (G 000 450 02).
1
Shift Cable
‹› Connect with cable retainer item - 11 -
‹› Installation location, refer to => [ Shift Mechanism, Installation Position ] See: Shifter M/T/Service and Repair/Shift Mechanism, Installation
Position
‹› Attach to the selector cable with a cable tie, refer to => [ Cable Tie Installation Locations ]
‹› From 11.06 changed fastener on shift lever inside shift mechanism item - 8 - => [ Shift Cable ] See: Shifter M/T/Service and Repair/Gearshift
Lever and Shift Housing Assembly Overview
2
Selector Cable
‹› Connect with cable retainer item - 10 -
‹› Installation location, refer to => [ Shift Mechanism, Installation Position ] See: Shifter M/T/Service and Repair/Shift Mechanism, Installation
Position
‹› Attach to the shift cable with a cable tie.
‹› From 11.06 changed fastener on selector bracket inside shift mechanism item - 6 -
3
Retaining Washer