Golf GL L4-2.0L (AEG) (2001)
NOTE: The black colored plug is a smaller diameter and used for the brake line inserted into the smaller hole
-
Remove 2 bolts with 10 mm hex heads -arrows- securing hydraulic unit/control module to bracket
-
Remove hydraulic unit with control module from bracket and place on a clean level work bench
-
Remove the new ABS control module (1C0 907 379 J) from package
-
Insert new adaptor -3- from kit into new ABS control module
-
Push adaptor down until clips -4- snap into position
CAUTION: THE ADAPTER CAN ONLY BE PRESSED IN ONCE AND CANNOT BE REMOVED AGAIN WITHOUT BEING
DAMAGED