Golf GL L4-2.0L (AEG) (2001)
-
Remove bulb -4- using a piece of rubber hose approx. 4 mm inner dia. (press hose onto bulb far enough to grip bulb and remove).
Tip:
Part numbers are for reference only. Always check with your Parts Dept. for the latest parts information.
-
Install new bulb Part No: N 017751 2 (press bulb into hose slightly, then install into bulb socket), Avoid damaging electrical contacts.
-
Turn on vehicle lights and check operation of bulb.
-
Reinstall fan speed control knob -5- in same position as removed (check operation).
Tip:
Heating and ventilation control assemblies replaced for inoperative fresh air control lever light will NOT be approved for Warranty reimbursement.
Warranty
*) Code per warranty vender policy
Required Parts and Tools
No Special Tools required.
Always see ETKA for the latest part(s) information.