Golf GL L4-2.0L (AEG) (2001)
Owner Letter
Section A
SECTION A- ECM Fault Interrogation
-
Ignition switch in "OFF" position
-
Obtain VAS 5051 and switch "ON"
-
Connect VAS 5051 / 6 diagnostic cable to data link connector located under dash on left side -arrow-
-
Turn ignition switch to "ON" position
-
On VAS 5051 Start-up screen, press "Vehicle Self- Diagnosis" button -arrow-
-
Select "01 - Engine Electronics"
-
Select "02 - Interrogate fault memory"
-
If DTC is present for the front oxygen sensor, print DTC information, turn ignition switch to "OFF" position, disconnect VAS 5051 from vehicle
and proceed to SECTION B