Golf GL L4-2.0L (AEG) (2001)
Steering Column Lock: Service and Repair
Steering lock housing, removing and installing
Removing
Airbag and steering column removed.
Upper and lower steering column trim removed.
-
Remove steering column switch bolt and steering column switch.
-
Remove plastic cover over shear bolts.
Ignition lock cable must also be disconnected on vehicles with automatic transmission.
-
Chisel off shear bolts with chisel.
Installing
-
Attach ignition lock cable if equipped with automatic transmission.
-
Install new shear bolts.
-
Tighten shear head bolts until head shears off.
-
Install steering column switch.
-
Adjust distance between steering column switch and steering wheel.
Continue installation in reverse sequence