Golf GL L4-2.0L (AEG) (2001)
5. Clamp
^
Replace
^
Tensioning
6. Tie rod
^
75 Nm (55 ft. lbs.)
^
Replacement parts are supplied preset
^
Vehicle alignment
7. Clamp with rubber sleeve
8. Return line
9. Nut
^
22 Nm (16 ft. lbs.)
10. Clamp with rubber sleeve
Installation position
^
Arrow on clamp points forward
^
Replace if threads in welded nut are damaged
11. Heat shield
12. Selflocking nut
^
45 Nm (33 ft. lbs.)
13. Selector mechanism bearing bracket
^
Center on support (arrow A) with heat shield -11 -.
14. Bolt
^
24 Nm (18 ft. lbs.)
15. Gasket
^
Observe installation instructions
16. Hydraulic line
17. Banjo bolt
^
M16x 1.5, 45 Nm (33 ft. lbs.)
18. Banjo bolt
^
M 14 x 1.5, 40 Nm (30 ft. lbs.)
19. O-ring
^
Replace
20. Steering gear