Golf GL L4-2.0L (AEG) (2001)
Fig. 8 Removing and installing transmission vehicle speed sensor
Location: Transmission vehicle speed sensor -arrow- is located on top of the transmission.
-
Switch ignition off, open hood.
-
Disconnect wiring connector from sensor.
-
Remove bolt and pull sensor out.
-
Replace seal.
Installation is performed in the reverse order of removal.
-
Tighten bolt to 10 Nm.
Fig. 9 Removing and installing vehicle speed sensor -G68- with transmission installed
Location: Vehicle speed sensor-arrow- is located on top of the transmission.
When the transmission is installed the sensor is covered by the left assembly mounting.
-
Obtain radio code on vehicles with coded radio.
-
Switch ignition off and disconnect battery Ground strap
-
Remove battery.
-
Remove air cleaner.