Golf GL L4-2.0L (AEG) (2001)
-
Remove power steering line -2- from front of transmission (arrows).
-
Remove retainer -3-.
-
Remove power steering line from rear of transmission (in area of pendulum support) and tie to one side.
-
Remove retaining bracket from valve body cover.
-
Remove pendulum support (arrows A and B).
-
Position tensioning strap T10038 around stabilizer bar -1- and right-hand drive shaft -2-.
-
Pull engine/transmission assembly onto stabilizer bar.
-
Carefully pry off breather cap -1-.
-
Remove bolts from valve body cover -2-.
-
Using a screwdriver (for example), carefully lift valve body cover off transmission housing.