Golf GL L4-2.0L (AZG) (2001)
All models
-
Using Release tool 3344A - 1 -, press spring - 2 - for reading light with interior monitoring - 3 - toward rear.
-
Remove reading light with interior monitoring - 3 - and disconnect harness connector.
NOTE: When operating spring - 2 -, make sure that Release tool 3344A - 1 - does not stick between molded headliner - 4 and metal frame - 5- in
molded headliner.
Only Golf
-
Remove molded headliner through rear lid out of vehicle.
Only Jetta
-
Fold passenger seat backrest down and remove molded headliner through rear door.
Only Golf wagon/Jetta wagon
-
Remove molded headliner through rear lid out of vehicle.
Installing
-
Installation is reverse of removal.