Golf GL L4-2.0L (AZG) (2001)
^
Insert brake pads and brake pad retaining springs (arrows) into brake carrier.
^
Install brake caliper housing with new self-locking bolts and torque to 35 Nm (26 ft. lbs.).
Note: The repair kit includes four self-locking bolts, which must always be installed.
^
Press brake lever -2- in direction of arrow and attach parking brake cable.
^
Install clip -1-.
^
Adjust parking brake.
^
Operate foot brake first after adjusting parking brake.
^
Install wheels.
Notes:
^
After each brake pad change firmly depress the brake pedal several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
After changing brake pads check brake fluid level.