Golf GL L4-2.0L (AZG) (2001)
/Page-774002.png)
10. 25 Nm (18 ft. lbs.)
11. Mounting
12. 4-pin - harness connector
^
Brown
^
Terminals 3 and 4 gold For Oxygen sensor 2 G130 and Oxygen sensor heater
13. Oxygen sensor 2 -G1 30(behind catalyst)
^
50 Nm (37 ft. lbs.)
^
Only coat threads using antiseize compound not containing silicone and marked "safe for oxygen sensors"; do not allow compound to enter
slots on sensor body
^
Remove and install with 3337
14. To center muffler
15. Front exhaust pipe with catalyst
16. 40 Nm (30 ft. lbs.)
^
Always replace
17. Gasket
^
Always replace
18. Exhaust manifold
19. Gasket
^
Always replace
20. Warm air collector plate
