Golf GL L4-2.0L (AZG) (2001)
/Page-4001.png)
Alarm Module: Service and Repair
Engine Control Module (ECM), Adaptation (Function 10)
Replacement Engine Control Module (ECM), Adaptation (function 10)
NOTE:
-
The engine control module is adapted to the immobilizer control module in the instrument cluster. When changing a component it must be
readapted.
-
If an authorized ignition key is not available but the secret number is, new ignition keys must be manufactured and adapted.
-
The adapting can be interrupted with the "C" button of VAG 1551
Requirements
Authorized ignition key available.
-
Insert old (authorized) key in ignition lock.
-
Connect VAG 1551, select operating mode 1, "Rapid data transfer". Switch ignition on and enter address word 17, "Instrument cluster".
After control module identification has been displayed:
Indicated on display (example)
IMMO-IDENT No.: VWZ7ZOV0066808 ->
-
Press -> button.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -1- and -0- to select function 10, "Adaptation".
Indicated on display
Rapid data transfer
Q
10 - Adaptation
-
Press -Q- button to confirm input.
Indicated on display
Adaptation
Enter channel number XX
-
Press button -0- twice to select "Channel O".
-
Press -Q- button to confirm input.
Indicated on display
Adaptation
Q
Erase learned value?
-
Confirm entry with -Q- button.
Indicated on display
Adaptation
->
Learned values are erased
-
Press -> button.
Indicated on display
Rapid data transfer
HELP