Golf GL L4-2.0L (AZG) (2001)
7. Pressure hose/line
^
Check pressure
^
Fill with oil before installing
Reservoir, removing and installing
1. Cap with dip stick
^
Oil level: between min. and max. marks; Engine temperature approx. 50°C (122°F)
^
Check oil level with cap screw on
^
With engine cold, oil level must not rise above Min. marking
^
Open cap with e.g. a bar
^
Arrow A: oil level with engine cold
2. Hose clamp
3. Suction hose
4. Return hose
5. Sockethead bolt
^
10 Nm (89 inch lbs.)
6. Reservoir
Pressure line and suction hose (TDI engine with A/C)