Golf GL L4-2.0L (AZG) (2001)
1. Circlip
-
Different thickness
-
Mark after removing and insert at same point
2. Thrust plate
-
Install with stepped side facing circlip
3. Inner plate
4. Outer plate
5. Pressure plate
-
Install with peened corrugated washer facing piston
6. Corrugated washer
-
Peened to pressure plate (item 5)
7. Securing ring
-
Removing and installing see Fig. 1
8. Piston cap
-
Sealing lips are vulcanized to piston cap
-
Moisten with ATF before installing
-
Turn piston cap slightly when installing
-
When removing and installing press down and fit securing ring (item 7)
9. Spring
-
Seat between piston and piston cap
10. Piston
-
Sealing lips are vulcanized to piston
-
Moisten with ATF before installing