Golf GLS L4-1.8L Turbo (AWW) (2001)
<-- Remove brake fluid lines -1- and -2- and install plugs from kit into hydraulic unit
Note:
The black colored plug is a smaller diameter and used for the brake line inserted into the smaller hole
<-- Remove 2 bolts with 10 mm hex heads -arrows- securing hydraulic unit/control module to bracket
^
Remove hydraulic unit with control module from bracket and place on a clean level work bench
^
Remove the new ABS control module (1C0 907 379 J) from package
<-- Insert new adaptor -3- from kit into new ABS control module
<-- Push adaptor down until clips -4- snap into position
CAUTION!
THE ADAPTER CAN ONLY BE PRESSED BE REMOVED AGAIN WITHOUT PRESSED IN ONCE AND CANNOT BE REMOVED
AGAIN WITHOUT BEING DAMAGED