Golf GLS L4-1.8L Turbo (AWW) (2001)
Oil Pressure Sender: Testing and Inspection
Oil pressure and oil pressure switch, checking
Special tools, testers and auxiliary items required
^
Oil pressure gauge V.A.G 1342
^
Voltage tester V.A.G 1527 B
^
Connector test set V.A.G 1594 C
Test conditions:
^
Engine oil level OK.
^
Engine oil temperature at least 80°C (radiator fan must start up once).
Test sequence:
-
Remove oil pressure switch F1 and install into oil pressure gauge.
-
Install oil pressure gauge V.A.G 1342 into oil filter bracket in place of oil pressure switch.
-
Connect brown wire of tester to Ground (GND).
-
Connect voltage tester V.A.G 1527 B using adapter cables from connector test kit V.A.G 1594 C to B+ and oil pressure switch. LED must not
light up.