Golf GLS L4-1.8L Turbo (AWW) (2001)
-
Check wiring between test box and connector for open circuit according to wiring diagram.
Contact 1 + socket 72
Contact 2 + socket 73
Contact 3 + socket 36
Contact 4 + socket 35
Contact 5 + socket 33
Contact 6 + socket 34
Wire resistance: max. 1.5 Ohms
-
Additionally check the wiring for short to battery positive or Ground.
-
Additionally check wires for short to one another.
If no fault is detected in the wiring:
-
Replace accelerator pedal position sender, item 4
Vehicles with automatic transmission 01M
-
Adapt control module for automatic transmission:
Continued for all vehicles
-
Check DTC memory:
-
Read out readiness code:
-
If the DTC memory has been erased or the engine control module separated from the permanent positive, the readiness code must be generated
again.