Golf GLS L4-1.8L Turbo (AWW) (2001)
Display Field 2
Programming and Relearning
Gateway, Coding (function 07)
When replacing the instrument cluster, the Data Bus On Board Diagnostic Interface -J533- must be coded according to vehicle equipment.
NOTE: Coding must be performed regardless if the instrument cluster is new or has been previously coded (installed in a vehicle).
Initiating coding
-
Press buttons -0- and -7- to select "Code Control Module", function 07.
Indicated on display:
Rapid data transfer
Q
07 - Code control module
-
Press -Q- button to confirm input.
Indicated on display:
Code Control Module
Enter code number XXXXX
(0-32000)
-
Determine code number using code table below:
Control Modules on "Powertrain"
Code:
CAN Bus
Automatic transmission
00001
Anti-lock brake system (ABS)
00002
Airbag
00004