Golf GLS L4-1.8L Turbo (AWW) (2001)
-
Remove cover for 14 pin connector.
-
Remove 14 pin connector from holder.
-
Open secondary lock for 14 pin connector (slide past lock tabs using small screw driver).
* 2002 Automatic transmission vehicles only *
-
Remove male terminal from cavity 7 of the 14 pin connector using the appropriate tool from the VAS 1978 Wiring harness repair kit.
-
Terminate removed wire as described in "Unused wiring, terminating".
-
Insert terminal 7 from Ignition coil overlay harness into cavity, 7 of the 14 pin connector.
* 2001 Automatic transmission vehicles only
-
Remove male terminals from cavities 2, 3 and 7 of the 14 pin connector using the appropriate tool from the VAS 1978 Wiring harness repair kit.
-
Terminate removed wires as described in "Unused wiring, terminating".
-
Insert terminals 2, 3 and 7 from Ignition coil overlay harness into cavities 2, 3 and 7 of the 14 pin connector.
-
Assemble 14 pin connector secondary lock.
-
Install cover for 14 pin connector over existing and new wire.
- Install 14 pin connector into holder. *
Manual transmission vehicles only
-
Remove male terminals from cavities 2, 3 and 7 of the 14 pin connector using the appropriate tool from the VAS 1978 Wiring harness repair kit.
-
Terminate removed wires as described in '~Unused wiring, terminating".
-
Insert terminals 2, 3 and 7 from Ignition coil overlay harness into cavities 2,3 and 7 of the 14 pin connector.
-
Assemble 14 pin connector secondary lock.
-
Install cover for 14 pin connector over existing and new wire.
-
Install 14 pin connector into holder.
Overlay harness connecting to 2-pin connector (all vehicles)