Golf GLS L4-1.8L Turbo (AWW) (2001)
^
Similar screen appears.
^
ECM Part Number and old software level is still displayed at (arrows).
Note:
New software level is not displayed until process is complete and fault memories have been erased.
-
Select the "Print", then "Screen" button.
^
VAS 5051 will print to printer immediately.
^
VAS 5052 will hold the print until process is complete and then you may take the tester to the printer for printing the screen.
-
Attach print to vehicle Repair Order. Once "Update - Programming" (flashing) is complete, the control module must be re-initialized.
-
Select the --> button.
- ^ The tester requests you to switch the ignition OFF
-
Switch ignition OFF.
IMPORTANT!
^
Wait at least 20 seconds before switching the ignition back ON (failure to wait at least 20 seconds may damage the ECM).
After waiting 20 seconds:
-
Switch ignition ON.
After switching ignition ON, the ECM has been re-initialized, however, fault memories must now be erased.