Golf GLS L4-1.8L Turbo (AWW) (2001)
Idle Speed: Adjustments
Idling Speed, Adapting
In exceptional circumstances e.g. customer complaints concerning droning noises, vibrations at idling speed, it is permitted to adjust the idling speed
slightly. But ensure that the idling speed is not outside the specified idling range. (If the speed is outside the tolerance range it is possible that the vehicle
will fail the next exhaust emissions test.)
Special tools and equipment
-
VAG1551 scan tool or VAG1552 mobile scan tool with VAG1551/3B cable
Test conditions
-
No code stored in DTC memory
-
Coolant temperature must be at least 80 °C, See display group 04, display zone 3.
Work sequence
-
Connect VAG1551 scan tool (VAG1552). Start engine and select "Address word" 01 of engine control module. When doing this the engine must
be running at idling speed. (Connecting scan tool and selecting engine control module). Refer to "VAG1551 Scan Tool See: Computers and
Control Systems/Tools and Equipment
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press keys 1 and 0 for the "Adaption" function and confirm input with the Q key.
Indicated on display:
Adaption
Feed in channel number XX
-
Press keys 0 and 1 for channel number 1 and confirm input with the Q key.
Indicated on display:
Channel 1
Adaption xxx
->
xxx RPM
xxx RPM
Text
Text
-
Change the specified speed in display zone 2 in jumps of 10 RPM with the following keys:
VAG1551: keys 1 and 3
VAG1552: keys (Up arrow) and (Down arrow)
Indicated on display:
Channel 1 Adaption xxx
->
xxx RPM
xxx RPM Text
Text
NOTE: The idling speed must not be adjusted to outside the permissible idling speed range.
-
Confirm input by pressing Q key.
Indicated on display:
Channel 1
Adaption xxx Q
Store amended figure?
-
Confirm entry by pressing Q key.
Indicated on display:
Channel 1
Adaption xxx
->
Amended figure is stored
-
Conclude adaption by pressing -> button.