Golf GLS L4-1.8L Turbo (AWW) (2001)
Suspension Spring ( Coil / Leaf ): Service and Repair
-
Compress coil spring with -VAG 1752/1- until upper spring plate is free.
-
Remove nut from piston rod.
-
Remove individual parts of suspension strut and coil spring with -VAG 1752/1-.
1 - Commercially available ratchet handle
2 - T 10001/8
3 - T 10001/11
4 - T 10001/5
5 - VAG 1752/1 Spring compressor
6 - VAG 1752/4 Retainer
Special tool -3186- is an alternative for tools described above.
-
Ensure coil spring is seated correctly in adapter -VAG 1752/4 (arrow),
Installing
-
Install coil spring with compressor -VAG 1752/1- on spring perch.
Note:
End of coil spring must lie against stop (arrow).
Tightening torque:
Nut for upper shock absorber mount 60 Nm (44 ft lb)
Always replace nut!
Nut for upper spring plate 60 Nm (44 ft lb)