Golf GLS L4-1.8L Turbo (AWW) (2001)
-
Install triple roller star, (chamfer on star faces shaft)..
-
Press star in to stop.
-
Install lock ring, and ensure lock ring clicks into groove.
-
Press in 60 grams (2.1 ounces) of grease G 000 633 (from repair set) into triple roller star.
-
Slide CV joint over roller and hold.
-
Press in 60 grams (2.1 ounces) of grease G 000 633 (from repair set) into back side of triple roller star.
-
Slide CV joint boot in place, bead in boot must lock into groove of CV joint.
-
Install new O-ring (arrow), from repair set, in groove.
-
Remove axle shaft from vice.
NOTE: Holes from CV boot and joint must align.