Golf GTI L4-1781cc 1.8L SOHC (HT) (1985)
-
release parking brake handle and check that levers on calipers return to stop (arrow)
-
loosen cable adjustment nuts until tension is relieved on both cables
-
operate parking brake handle three times to stretch/seat cables
-
eliminate play from parking brake handle by tightening cable adjustment nuts by hand
-
tighten cable adjustment nuts further until following conditions are met:
^
hand lever in first position (one click) = moderate wheel drag (equal on both rear wheels)
^
hand lever in second position (two clicks) = high rotational effort on rear wheels when turned by hand (almost locked)
^
hand lever in third position (three clicks) = rear wheels locked
-
release parking brake handle (wheels must spin freely)
-
check that apply lever gap (distance between lever and stop on caliper) does not exceed 1.0 mm (0.039 in.)
Note
Use a wire feeler gauge to check apply lever gap.
-
if gap exceeds 1.0 mm (0.039 in.) loosen cable adjustment nut in 1/2 turn increments until gap is within specification