Golf GTI L4-1781cc 1.8L SOHC (HT) (1985)
- Disconnect harness connector -B- from Mono-Motronic ECM (J257) (see illustration 24-M995)
- Cut tie wrap that secures connector cover -A- to harness connector and remove cover.
- Check Mono-Motronic ECM (J257) harness connector for presence of black wire at terminal 40.
- Remove black wire from terminal 40 of the ECM harness connector -B-.
- Insulate black wire terminal with shrink wrap tubing (available locally).
- Install rubber cap Part No.: 357 972 840 into empty cavity on harness connector.
- Reinstall connector cover -A- to harness connector and secure with new tie wrap Part No.: N 020 902 2.
- Reinstall harness connector to Mono-Motronic ECM (J257).
- Reinstall plenum cover.
- Connect battery.
- Enter radio code.
For warranty repairs use:
Damage code:
24C5 66 000 1
Labor operation:
24C5510 20 T.U.