Golf GTI L4-1781cc 1.8L SOHC (HT) (1985)
Rear Knuckle Alignment Link: Technical Service Bulletins
Tie Rods - Installation Procedure/Simplified Measurement
Applies To
GOLF/JETTA
with manual steering from 1985
Group
48
Subject
Tie Rods
Part Identifier N/A
Key Points
Installation procedure and simplified measurement
A
Number
86-01
January 28, 1986
-
tighten lock rings
Note
The dimension (b) also applies to vehicles with automatic transmission..
Steering rack, centering
-
measure from shoulder on housing to end of rack
^
distances (a) must be equal
Tie rods, replacing
-
attach both tie rods
-
with steering rack centered turn each tie rod to dimension (b)
^
dimension b = 70.5 mm (2.77 in.)