volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Locks - Re-Keying to Maintain One-Key Operation|Page 6455 > < Front Bumper|Service and Repair
Page 1
background image

Front Door Exterior Handle: All Technical Service Bulletins
Locks - Re-Keying to Maintain One-Key Operation

GROUP

57

NUMBER

89-01

September 30,1989

MODEL(S):

All Models all years
SUBJECT:

Re-keying locks to maintain one-key operation

Re-keying locks

Lock cylinders cannot be ordered by specified key numbers. On most cars one-key convenience can be retained by changing the appropriate lock
tumblers to match the key that is going to be used.

Note

Tumblers in the ignition lock cannot be changed.

On certain older vehicles, the glove box key is different than the ignition key. A separate kit is available from the Parts Department to change this lock.

Key code, locating

The key code is a two-letter, four-digit number that represents the contour of the key.

^

The key code may be found on:

^

the plastic plate that comes with the original set of keys

^

recorded by owner or selling dealer in vehicle owners manual

^

door handle

^

ignition lock

^

trunk lock

Lock cylinder tumblers, changing

Locks - Re-Keying to Maintain One-Key Operation|Page 6455 > < Front Bumper|Service and Repair