Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
^
select correct tumbler repair kit
^
bags are marked by numbers 1-2-3-4 to identify the tumblers
^
insert lock's original key into cylinder lock
^
carefully remove lock cylinder
^
do not damage O-ring
^
place thumb and forefinger over tumblers to hold them in place
^
pull out key
^
if tumblers are peened in place, carefully remove peened metal with suitable tool until lock tumblers can be removed
^
place lock cylinder on clean flat surface
^
release the cylinder and tumblers slowly
^
tumblers will come out as you let go
CAUTION
Do not lose any springs or tumblers.
^
remove all tumblers and springs from cylinder
Selecting tumblers
CAUTION
VW Key Code Service Catalog is strictly confidential.
^
look up key code of ignition lock in Key Code Service Catalog
^
catalog will tell you what tumblers to use and the sequence they are to be inserted into lock cylinder
Example:
Key code AH 9129
The code in catalog is listed in following sequence:
3-1-3-2-3-1-3
^
add 1 to the first and third tumbler size to initially make the lock work. In example use tumbler sizes in this order:
4-3-4-1 -3-4-1
3 1 3 2 3 1 3 = tumbler arrangement
1 1
according to code list
+ 4 1 4 2 3 1 3 = tumbler arrangement of converted lock cylinder
CAUTION
Part numbers are for reference only. Always consult with the parts department for the latest information.
Note
Lubricate the tumblers and springs with G 000 400 grease or equivalent as they are inserted into the lock cylinder.
^
reading key code numbers from left to right, insert tumblers in the lock cylinder housing starting at the key slot