volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Hydraulic Cam Follower <--> [Lifter / Lash Adjuster, Valve] > < Measurement Specifications|Page 1472

Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)

Page 2
background image

Note Beveled Corners On Bearing Caps

NOTE:  Image insert shows proper installation of bearing caps. Note the beveled corners face intake side.

7. Torque the bearing cap nuts to 15 Nm (11 ft lb). Reinstall the cylinder head cover with a new gasket.
8. Install the camshaft drive belt and adjust the camshaft timing.
9. Install the ignition distributor and adjust ignition timing.

Hydraulic Cam Follower <--> [Lifter / Lash Adjuster, Valve] > < Measurement Specifications|Page 1472