Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
![background image](/volkswagen/golf_gti/l4-1984cc_2.0l_dohc_(9a)/Page-413001.png)
Connecting Rod: Specifications
Measurement Specifications
Connecting Rod Radial Clearance [1]:
New ........................................................................................................................................................................ 0.01-0.06 mm (0.0004-0.0024 in.)
Wear limit ................................................................................................................................................................................... 0.12 mm (0.0047 in.)
Connecting Rod Axial Clearance [2]:
New ........................................................................................................................................................................ 0.05-0.31 mm (0.0020-0.0122 in.)
Wear limit ................................................................................................................................................................................... 0.37 mm (0.0145 in.)
Checking Torque .......................................................................................................................................................................................... 30 Nm (22 ft lb)
Assembly Torque ........................................................................................................................................................... 30 Nm (22 ft lb) plus 1/4 turn (90°)
_____________________________________
[1]: When checking radial clearance, lubricate the contact surface of the nut or bolt before tightening. When checking connecting rod radial clearance,
tighten the nut or bolt only to 30 Nm (22 ft lb) and not the additional 1/4 turn.
[2]: If connecting rod radial clearance is excessive, the crankshaft connecting rod journals should be checked. If the crankshaft journal diameters are
within specifications, recheck radial clearance using new bearing shells.