Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
Control Assembly: Service and Repair
NOTE:
^
A change to the control head was made during production of 1988 Golfs from VIN JB 048 306.
^
The temperature lever of the new control head has two pivot points instead of one.
^
In addition, a longer temperature blend door cable is used.
^
The new-style control head is interchangeable with the old style head, but the longer cable must be used.
^
The longer cable can be used with early-style control heads.
-
Disconnect the negative (-) terminal from the battery.
-
Remove the center console. On manual transmission cars, first remove the gearshift lever knob and the gearshift boot.
-
On automatic transmission cars remove the selector lever cover plate.
First Type
Second Type
-
Depending on the center console (first type or second type), remove the retaining screws and partially remove the console. Separate any electrical
connectors from behind.