Golf GTI L4-1984cc 2.0L DOHC (9A) (1990)
Set Fresh air/heating controls as follows:
^
Temperature control knob to full hot
^
Fresh air blower to high speed (position 4)
^
Air distribution on bi-level (footwell and central A/C ducts)
^
A/C switched OFF
^
Recirculating flap switched ON
-
Start engine and run engine for approx. 30 minutes.
-
Switch ignition OFF; remove protective seat and floor covers.
-
Return temperature control knob, fresh air blower, A/C switch and recirculating flap switch settings to customer's settings.
-
Let vehicle sit for a minimum of 2 hours with windows open (preferably with doors open if possible).
-
Enter date of Airsept(R) treatment into the vehicle maintenance record.
When procedure applies to vehicles within The New Vehicle Limited Warranty and adheres to Warranty Policy guidelines, use the following:
Part Identifier:
8700
Labor Operation: 8700510
220 TU
After Airsept(R) Treatment
Explain to the customer that running the air conditioner during Spring and Fall months reduces the chance for airborne pollutants to adhere to the
evaporator and housing.